XPM167 and XPM267 Power Supplies

XPM series HL power supplies The XPM167and XPM267 Power Supplies are UL/CUL approved for mounting outside of a hazardous location. The XPM167 has an arc detection circuit to shut down the power supply within 40 milliseconds in the event of an arc from the bar or cable. Includes a monitoring system, when operated with the Blue Bar HL, to detect arcing conditions and short circuit on the ionizing points and the cable. Indicator lamps verify input and output voltage status as well as arc detection. Integrated relay contacts allow for remote monitoring of these features.

Specifications:
XPM167
Input Requirements	120V, 60Hz
Output Voltage	7kV, 3mA max
Number of outputs for static eliminators	4
Max Length of static bars which can be attached	300 inches
Does the unit accept shielded cable	N/A
Acceptable for hazardous locations	No
XPM267
Input Requirements	230V, 60Hz
Output Voltage	7kV, 3mA max
Number of outputs for static eliminators	4
Max Length of static bars which can be attached	300 inches
Does the unit accept shielded cable	N/A
Acceptable for hazardous locations	No
Part Numbers:
XPM167	4009064
XPM267	4009065

Typical Use

Used with the hazardous location static bar Blue Bar HL. UL/CUL approved for mounting outside of hazardous locations.

Download Files

Blue Bar HL Data Sheet

To view literature that has been downloaded or while online, you need to have Adobe Acrobat Reader installed on your computer.


Blue Bar HL Static Control Bar Now, the well known, high output “Blue Bar” static control bar is available in a hazardous location

Transvector with Blue Bar HL Static Control Bar A Transvector with Blue Bar HL Static Control Bar provides a highly efficient "air knife" or "curta

Power Supplies